Neets Control - SieRRa II

8-Button Keypad with remote monitoring and iOS/Android

Description

Neets Control – SieRRa II provides uniform AV control interface in all rooms through an 8-Button Keypad with built-in controller.

SieRRa II also enables touch control with a tablet (iOS or Android) through a built-in webserver. PoE support to avoid an external PSU.

Email notification on lamp/filter hours and warnings as well as Central Control monitoring is supported as a standard.

Choose variant

You are currently not logged in, but you can still request a quote on this product.


  • 8-Button AV control system with iOS/Android support
    The world’s most compact AV control system – no external processors required
  • 8 Freely configurable keypad buttons
    Provides uniform AV control interface in all rooms and all 8 buttons can be configured for any function
  • 1 Bi-directional RS-232 port or 2 IR ports
    Used for controlling projectors, displays, amplifiers & other AV devices with feedback functionality
  • 2 Uni-directional RS-232 or 4 IR ports:
    Used for sending commands to projectors or other AV devices using serial or infrared communication
  • 1 Ethernet port
    Used for controlling 10 LAN devices and connection to Central Control and Project Designer
  • 3 General Purpose I/O ports
    Used for input/output control of relays, switches and sensors
  • 1 NEB port (Neets Expansion Bus)
    Add up to 5 additional devices - choose between Keypad, Level Control or Port Expansion (serial and I/O)
  • 1 front USB port
    Used for easy system configuration, uploading and downloading project files, service and maintenance
  • PoE support
    Includes Power over Ethernet support to avoid external PSU (12V PSU included)
  • Email notifications and warnings
    Email notification on lamp/filter hours and warnings
  • Infrared learner
    SieRRa II comes with a built-in IR learner.
  • Included:
    Configuration through our free and no-license software: Neets Project Designer
Technical Specifications
Communication ports:
1 x RS-232 (TX and RX) or 2 IR
Baud: 1200 – 115200
Data Bit: 7/8
Parity: None, Even, Odd
Stop Bit: 1/1.5/2

2 x RS-232 or 4 IR (TX only)
Baud: 1200 – 115200
Parity: None, even, odd
Stop Bit: 1/1.5/2

IR:
Transmit
381 Hz – 500 kHz
Devices: 2

1 x Ethernet port:
Speed: 10/100 Mbit
auto-detect
Devices: 10

3 x I/Os (GPIO)
Input:
Sense Low: <1 VDC
Sense High: >4 VDC

Output:
Type: Open drain
Max Voltage: 24 VDC
Max Current: 0.5 A

Neets Expansion Bus (NEB)
12 V (0.3 A) output

Included in box:
12 V PSU (110- 230V AC)

PoE – Power over Ethernet
Complies with IEEE 802.3
and 802.3at, type 1

Dimensions:
(without frame) (EU):
Width: 55 mm
Height: 55 mm
Depth: 17 mm

Dimensions:
(without frame) (DK):
Width: 72 mm
Height: 45 mm
Depth: 17 mm

Dimensions:
(without frame) (US):
Width: 1,77 inches
Height: 4,13 inches
Depth: 0,94 inches

Weight:
90 g/ 3,17oz

Compliancy:
Approval: CE, FCC (part 15, class A)
EN 55022
EN 55024

Product item numbers:
310-0102: Neets Control – SieRRa II,
EU - Polar white
310-0103: Neets Control – SieRRa II,
EU - Anthracite
310-0202: Neets Control – SieRRa II,
DK - Polar white
310-0203: Neets Control – SieRRa II,
DK - Anthracite
310-0402: Neets Control – SieRRa II,
US - Polar white

Software

Neets Project Designer
Neets Project Designer
Read more

Download
Neets Central Control
Neets Central Control
Read more

Download

Please remember to login for access to the latest release of Neets Project Designer. If you do not have a Neets account, please fill out the form "Get Accesss".

Firmware

-Ver. 3.12.0 (16-10-2017)
New Features:
  • KNX devices license support in control systems.
  • Calendar functions and support for NEB expansion unit's RTC.
Bug Fixes:
  • QueBec Pro I/Os are now in input state by default.
+Ver. 3.11.3 (14-09-2017)
+Ver. 3.11.2 (27-06-2017)
+Ver. 3.11.1 (09-06-2017)
+Ver. 3.11.0 (28-04-2017)
+Ver. 3.10.0 (05-12-2016)
+Ver. 3.9.0 (31-10-2016)
+Ver. 3.8.5 (02-09-2016)
+Ver. 3.8.4 (17-06-2016)
+Ver. 3.8.3 (03-06-2016)
+Ver. 3.8.2 (01-06-2016)
+Ver. 3.8.1 (10-05-2016)
+Ver. 3.8.0 (27-04-2016)
+Ver. 3.7.0 (11-01-2016)
+Ver. 3.6.7 (06-11-2015)
+Ver. 3.6.6 (02-11-2015)
+Ver. 3.6.5 (28-10-2015)
+Ver. 3.6.4 (13-10-2015)
+Ver. 3.6.3 (13-08-2015)
+Ver. 3.6.2 (29-06-2015)
+Ver. 3.6.1 (29-06-2015)
+Ver. 3.6.0 (21-05-2015)
+Ver. 3.5.2 (20-04-2015)
+Ver. 3.5.1 (25-03-2015)
+Ver. 3.5.0 (16-03-2015)
+Ver. 3.4.4 (04-02-2015)
+Ver. 3.4.3 (04-02-2015)
+Ver. 3.4.2 (26-01-2015)
+Ver. 3.4.1 (13-01-2015)
+Ver. 3.4.0 (15-12-2014)
+Ver. 3.3.2 (14-11-2014)
+Ver. 3.3.1 (04-11-2014)
+Ver. 3.2.4 (17-09-2014)
+Ver. 3.2.3 (02-09-2014)
+Ver. 3.2.2 (17-07-2014)
+Ver. 3.2.1 (27-06-2014)
+Ver. 3.2.0 (20-06-2014)
+Ver. 3.1.0 (27-02-2014)
+Ver. 3.0.2 (16-01-2014)
+Ver. 3.0.1 (10-12-2013)
  • Q: Why has Neets upgraded the SieRRa to a SieRRa II?
    A: The SieRRa II has a brand new and powerful processor - same processor as in the DelTa. This makes the SieRRa II a very powerful device with new features including PoE (Power over Ethernet), which optimizes the power supply for the SieRRa II.

    While the original SieRRa only supports five devices, the SieRRa II will connect up to 10 devices via LAN.
  • Q: SieRRa II has three I/O ports. What are they for?
    A: Most people opt to use two I/O ports for controlling the projector screen – one for roll-down and one for roll-up. With the third I/O port, you are able to connect a PIR motion sensor, which is brilliant for designing eco-friendly installations. You can make the PIR turn off your installation when no motion is detected and remember to time the system so that it does not turn off too soon.

    What you could also use your I/O for is a keyboard lock, which prevents unwanted handling of the control panel.
  • Q: Is it possible to access a GUI (Graphical User Interface) with the SieRRa II?
    A: Yes, you can freely configure and design a GUI for the SieRRa II in Project Designer.
  • Q: Can I use my SieRRa II to control IR devices and how many?
    A: With the Neets Dual IR Emitter PN 307-0286, the TX/IR port can be setup with four IR emitters. In case you need more IR emitters, you will need to go with an AlFa II or DelTa.
  • Q: Why do both of the IR devices react to the same output command?
    A: They do so because Neets Control System sends out the same command string to both IR emitters, so if you have two similar devices using the same IR codes, they will react simultaneously.
  • Q: Are all the button functions pre-defined?
    A: No, all the buttons are freely configurable with the Neets Configuration Software.
  • Q: Is the SieRRa II expandable?
    Q: Yes, you can expand with up to two NEB modules, choose between up to two extra NEB Keypads and/or up to two NEB Level Controls and/or one NEB Port Expansion.

    For further specification, please go to our website and find Neets Expansion Bus in the product page section.
  • Q: Why can’t I find the original SieRRa in Neets Project Designer?
    A: The original SieRRa has been superseded by the SieRRa II, so if you have an original SieRRa, you need to configure your project using Neets Project Editor.
  • Q: What software should I use for configuring the SieRRa II?
    A: We recommend that you use the newest version of Neets Project Designer.
  • Q: Can I use the SieRRa II with Neets Central Control?
    A: Yes, the SieRRa II is available in Neets Central Control.
  • Q: Does the SieRRa II control system have different LED colors for each individual state?
    A: Yes, all of the LEDs change colors according to the state of each button.
  • Q: How do I use the built in infrared learner?
    A: Behind the third row of buttons, there is a infrared learner. Connect the SieRRa II to your computer via USB, open Neets Device Editor and choose the port to which the SieRRa II is connected. Now learn the codes for the device as you would do with the Neets Uni IR Learner.

    When using the SieRRa II as an infrared learner, please make sure the control system is not in an error state.
  • Q: Can I power the SieRRa II with both PSU and PoE?
    A: No, it is important to only use one of the two methods of powering the SieRRa II panel.
  • Q: What should I do when I want to use the panel as Enhanced LAN expansion?
    A: Upload an empty project into the panel. This ensures that the systems are running the same firmware.
  • Q: How does extension devices communicate with the control system?
    A: The Neets Control system uses Multicast to communicate. This is done on IP address 224.10.10.25 port 7979.
    • Each control system/extension device sends out a "keep a live" every 3 seconds.
    • If the control system has not received any message from an extension device for 10 sec it will indicate connection error.
    • The timeout is an individual timer for each extension device.
    • The “missing connection” indication will be removed when the connection is established and the extension device is initialized again.
    • The 10 sec timeout is reset whenever there are communication between the units e.g. when RS232 commands is transmitted or an event is triggered.
    • The control systems support IGMP, this allows the control system to only receive multicast packages on the address that it need and it also doesn't “Pollute” the entire network like UDP broadcast. In order to use IGMP the switch also need to support this.
  • Q: The panel won't start up when i want to upload?
    A: Remove SD card and format in Fat32, and try again.
  • Q: What does it mean, when all LED's are blinking?
    A: When you have not put an OFF function on the keypad and the system is not able to establish connection to a LAN TCP device, all LED's blink continuously .
  • Q: How many NEB's can you add to the SieRRa II?
    A: Add up to 5 NEB units via NEB extender.
    Max 4 x NEB Keypad
    Max 2 x NEB Level Control
    Max 1 x NEB Port Expansion
  • Q: What is the maximum memory card capacity supported?
    A: It is important to use an industrial grade card with maximum 4 Gb of memory. We recommend smallest possible and stock size are 256 Mb.

    spare cards can be purchased here:
    http://www.neets.dk/products/spare-parts/153

Introduction to Neets Control SieRRa II

Watch this video to get an intro to many of the great features that the SieRRa II offers.

Forgot my Password

Have you forgotten your password? Don't worry! Type your E-mail below and we will send you a new password.