Neets Sound Bar - SB1

We bring your message to life

Description

With the new Neets Sound Bar – SB1 poor sound quality in video calls or meetings will never again spoil your experience.

Now, high class sound comes in one easy-to-install sound bar with extremely good looks. The Neets Sound Bar - SB1 is a stylish sound bar, designed to bring your message to life. Whether you’re in a meeting presenting a video, an audio track or facilitating a conference call.

The Sound Bar comes with a front cover in classic black. Or you can choose a blue, grey, red, or green front cover in the exclusive fabric Kvadrat Tonica 2 in 100% wool.

Control System compatibility
Compatible with all Neets Control Systems
Can be mounted anywhere or sit on a shelf
Brackets for wall mounting included in the box
System
2.0 stereo configuration, based on concept from stereo monitors: 2 set of 4” full-tone woofers + 1” tweeter
Amplifier
Amplifier with built-in DSP functionality
Power on
RS-232 or ”Wake-on-signal”
Cabinet
All MDF construction is covered in black vinyl and the front grill is in fabric
Power indicator
Power LEDs on the front integrated behind grill
VESA Mounting
Compatible with VESA 400 and VESA 800 for mounting on carts and stands

Audio output
Output power 4 x 20 Wrms
THD+N < 0.1 % @ 1 W
Woofer 2 x 4” dual magnet,
sandwich membrane
w/rubber surround
Tweeter 2 x 1” soft dome
Frequency Response 50 Hz - 20 kHz +/- 3 dB
Maximum SPL 106 dB SPL @ 1m

Unbalanced audio input
Number of inputs 1 stereo input
Input impedance < 100 k Ohm
Wake on signal Yes
Connector 2 RCA female

Balanced audio input
Number of inputs 1 stereo input
Input impedance < 100 k Ohm
Connector 1 x 5 pin screw block

Digital audio input
Interface standard IEC 60958
AC-3, DTS decoding Not supported
Bit depth 16/24 bit
Sample rate 32/44.1/48/96/192 kHz
Wake on signal Yes
Connector 1 TOSLINK female

On/Off
Auto On/Off Yes
Wake on signal Yes

RS-232
Ports 1 x bidirectional
Baud rate 19200 bit/sec
Data bits 8
Parity None
Stop bits 1
Connector 1 x 3 pin screw block

Power input
Input voltage 24 VDC
Max power usage 50 W
Standby power usage < 0.5 W
Connector 5,5 mm DC plug

Power adaptor
Line voltage 100 VAC – 240 VAC
Line frequency 50 Hz – 60 Hz
Output voltage 24V
Max output current 2.5A

General
Enclosure Wood (MDF)
Enclosure finish Mate black vinyl
Front grille Textile covered MDF
Width 1018 mm / 40.1 inch
Depth 75 mm / 2.95 inch
Depth w. wall bracket 81mm / 3.18 inch
Height 130 mm / 5.1 inch
Weight 4.5 Kg
Shipping width 1120 mm / 44.1 inch
Shipping depth 150 mm / 5.9 Inch
Shipping height 200 mm / 7.8 Inch
Shipping weight 6.5 Kg
Storage temperature -20 °C to 50 °C
Storage moisture Non condensing

Part no: 312-0040