Neets Sound Bar - SB1

We bring your message to life


With the new Neets Sound Bar – SB1 poor sound quality in video calls or meetings will never again spoil your experience.

Now, high class sound comes in one easy-to-install sound bar with extremely good looks. The Neets Sound Bar - SB1 is a stylish sound bar, designed to bring your message to life. Whether you’re in a meeting presenting a video, an audio track or facilitating a conference call.

The Sound Bar comes with a front cover in classic black. Or you can choose a blue, grey, red, or green front cover in the exclusive fabric Kvadrat Tonica 2 in 100% wool.

Choose variant

  • Control System compatibility
    Compatible with all Neets Control Systems
  • Can be mounted anywhere or sit on a shelf
    Brackets for wall mounting included in the box
  • System
    2.0 stereo configuration, based on concept from stereo monitors: 2 set of 4” full-tone woofers + 1” tweeter
  • Amplifier
    Amplifier with built-in DSP functionality
  • Power on
    RS-232 or ”Wake-on-signal”
  • Cabinet
    All MDF construction is covered in black vinyl and the front grill is in fabric
  • Power indicator
    Power LEDs on the front integrated behind grill
  • VESA Mounting
    Compatible with VESA 400 and VESA 800 for mounting on carts and stands
Audio output
Output power 4 x 20 Wrms
THD+N < 0.1 % @ 1 W
Woofer 2 x 4” dual magnet,
sandwich membrane
w/rubber surround
Tweeter 2 x 1” soft dome
Frequency Response 50 Hz - 20 kHz +/- 3 dB
Maximum SPL 106 dB SPL @ 1m

Unbalanced audio input
Number of inputs 1 stereo input
Input impedance < 100 k Ohm
Wake on signal Yes
Connector 2 RCA female

Balanced audio input
Number of inputs 1 stereo input
Input impedance < 100 k Ohm
Connector 1 x 5 pin screw block

Digital audio input
Interface standard IEC 60958
AC-3, DTS decoding Not supported
Bit depth 16/24 bit
Sample rate 32/44.1/48/96/192 kHz
Wake on signal Yes
Connector 1 TOSLINK female

Auto On/Off Yes
Wake on signal Yes

Ports 1 x bidirectional
Baud rate 19200 bit/sec
Data bits 8
Parity None
Stop bits 1
Connector 1 x 3 pin screw block

Power input
Input voltage 24 VDC
Max power usage 50 W
Standby power usage < 0.5 W
Connector 5,5 mm DC plug

Power adaptor
Line voltage 100 VAC – 240 VAC
Line frequency 50 Hz – 60 Hz
Output voltage 24V
Max output current 2.5A

Enclosure Wood (MDF)
Enclosure finish Mate black vinyl
Front grille Textile covered MDF
Width 1018 mm / 40.1 inch
Depth 75 mm / 2.95 inch
Depth w. wall bracket 81mm / 3.18 inch
Height 130 mm / 5.1 inch
Weight 4.5 Kg
Shipping width 1120 mm / 44.1 inch
Shipping depth 150 mm / 5.9 Inch
Shipping height 200 mm / 7.8 Inch
Shipping weight 6.5 Kg
Storage temperature -20 °C to 50 °C
Storage moisture Non condensing

Part no: 312-0040

Forgot my Password

Have you forgotten your password? Don't worry! Type your E-mail below and we will send you a new password.